Support
Q: What should I do if the light does not turn on when I first receive it?
A: The battery comes with a low charge from the factory. Please set the physical switch on the light body to the “ON” position (usually located on the back of the solar panel or the side of the light). Then install the product in a sunny area with the solar panel facing the sun. For first-time use, we recommend charging continuously for 2-3 days (under sunny conditions) to fully activate the battery. After that, under normal use, 8-10 hours of charging on a sunny day will be sufficient for nighttime operation.
Q: What working modes does this light have? How do I switch between them?
A: Use the button switch to cycle through three modes (each press switches to the next):
Mode ①: Motion-activated at night – lights up at 100% brightness when motion is detected.
Mode ②: Always-on at night – stays on at 10% brightness for 8 hours, then turns off automatically.
Mode ③: Smart hybrid mode – stays on at 3% brightness at night, instantly jumps to 100% brightness when motion is detected, and returns to 3% after motion stops.
Q: Why does the lighting time become shorter on cloudy or rainy days?
A: On cloudy or rainy days, sunlight is insufficient, so the battery cannot be fully charged, resulting in shorter lighting time at night. We recommend installing the product in a location that receives 8-10 hours of direct sunlight per day. After several consecutive cloudy/rainy days, wait for the weather to clear and let the light charge fully for 2-3 days – the lighting time will return to normal.
Q: What is the motion detection distance and recommended installation height?
A: The product features dual PIR sensors with a detection distance of up to 40 feet (about 12 meters) and a detection angle of 180°. The recommended installation height is 8-10 feet (about 2.5-3 meters). Avoid pointing the sensor toward reflective surfaces or having it blocked by tree branches or walls.
Q: Is this light waterproof? Can it be used on rainy days?
A: Yes. The product has an IP65 waterproof rating, which effectively protects against rain, dust, and splashing water. Be sure to regularly wipe the solar panel surface with a soft cloth to remove dust, bird droppings, or snow to maintain charging efficiency. Do not submerge the light body in water.
Q: Can I replace the built-in battery?
A: No. The built-in battery of this solar light is non-replaceable. Solar lights are mainly charged by receiving solar energy, and there is no need for users to replace the battery themselves. If you experience battery aging or significantly reduced lighting time, first make sure the product is installed in a sunny location and fully charged. If the problem persists, please contact customer service for after‑sales support. Do not disassemble the light yourself.
Q: The motion sensor does not trigger or the light does not turn on after installation. How should I troubleshoot?
A: ① Make sure the light switch is set to the “ON” position. ② Ensure the solar panel has been charged for enough time and that the installation location receives sufficient direct sunlight. ③ Clean the surface of the solar panel to remove any obstructions. ④ Check that there are no tree branches, walls, or other obstacles in front of the sensor. ⑤ If testing during the day, high temperatures may reduce sensor sensitivity – it is better to test after dusk. ⑥ If the issue persists, contact after‑sales support.